#Minicom cat5 smart extender how to
#Minicom cat5 smart extender driver

The option in Figure 8 can also work with only 1 user workstation connected at the Receiver. To Computer Monitor port To Computer Mouse port The connections are the same as in Figure 7, with the addition of the 3 in 1 CPU cable that connects a 2nd computer to the Receiver. User 2 can only access his local computer. User 1 can access his local computer or the remote computer. The KVM Extender as a 2-port KVM Switch Figure 8 illustrates the system connected to 2 computers and 2 workstations. P110ДЇigure 7 Giving 2 users access to 1 computerДЎ0. Access to the computer is on a first-come-first-served basis.

The connections are the same as in Figure 6, with the addition of a KVM workstation for user 2. Giving 2 users access to 1 computer To give 2 users access to 1 computer connect the system as in Figure 7. To use the KVM Extender as an extender, connect the system as in Figure 6. The KVM Extender as an extender Extend the KVM workstation from the computer up to a distance of 110m/360ft. The power supply specifications are: Regulated 6VDC 2 Amp, minus on internal pinДЁ.

Use a Minicom Power adapter p/n 5PS20025. However, when cascading Smart Extenders, some of the Transmitters need an external power supply. The Transmitter receives its power from the connected computer and does not generally need an external power supply. Power supply Connect the Receiver to the power supply with the Power adapter and Power cord provided. The cable connects to the Computer section of the Receiver rear panel, see Figure 3.Д§. The 3 in 1 CPU cable The 3 in 1 CPU cable вЂ“illustrated below вЂ“ is only used when the Receiver connects to a computer. The KVM Extender cables The Transmitter comes with built-in KVM cables that connect to the computerвЂ™s Video card, Mouse and Keyboard ports. Place cables away from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise.Д¦. Pre-installation instructions Disconnect all computers from the electrical power supply. Built-in KVM Power connector cablesД¬AT5 SMART KVM EXTENDER Computer Keyboard portДЇigure 3 The Receiver rear panel Picture adjusterДҐ. The KVM Extender units The figures below illustrate the Transmitter and Receiver units.

#Minicom cat5 smart extender how to

This Guide illustrates the KVM Extender system and explains how to install and operate it. The Receiver can be up to 110m/360ft away from the Transmitter.

ДЄ Shielded CAT5 FTP (Foil Shielded Twisted Pair) Solid Wire 2x4x24 AWG cable terminated with RJ-45M connectors connects the KVM Extender system.

The system components The KVM Extender system consists of the following: * Wherever the word вЂcomputerвЂ™ appears in this guide it can equally refer to a KVM switch.ДЈ. Gives 2 users at 2 workstations control of 1 computer*

Д®xtends KVM control over a computer* up to a distance of 110m / 360ft.

Introduction The CAT5 Smart KVM Extender (KVM Extender) system from Minicom is an advanced KVM switch that performs the following functions: All other trademarks and registered trademarks are the property of their respective owners. Trademarks PS/2 is a registered trademark of International Business Machines Corporation. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Minicom Advanced Systems Limited. Information in this document is subject to change without notice. Minicom Advanced Systems Limited assumes no responsibility for any errors that appear in this document. Changes or modifications made to this equipment not expressly approved by Minicom Advanced Systems Limited could void the userвЂ™s authority to operate the equipment. If operation of this equipment in a residential area causes radio frequency interference, the user, and not Minicom Advanced Systems Limited, will be responsible. These above rules are designed to provide reasonable protection against such interference when operating the equipment in a commercial environment. This equipment also complies with the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of Communications. This equipment complies with Part 15, Subpart J of the FCC rules for a Class A computing device. Technical precautions This equipment generates radio frequency energy and if not installed in accordance with the manufacturerвЂ™s instructions, may cause radio frequency interference. Welcome The CAT5 Smart KVM Extender system is produced by Minicom Advanced Systems Limited.

#Minicom cat5 smart extender driver

14 Mouse driver settings when replacing a computer. 13 Keyboard settings when replacing a computer. 8 The KVM Extender as a 2-port KVM Switch.